COMPTIA IT CERTIFICATION BUNDLE

Interactive self paced eLearning course

2 STUDENTS ENROLLED

If you plan on obtaining several CompTIA certifications, this bundle is the way to go. By the time you complete A+ you will have the skills and credentials to start working in the IT field. When you add on Network+, and Security+, you’ll have a well-rounded foundation that will allow you to advance your IT career in many directions. As you’ve probably seen the more certifications you achieve, the more income you’ll make! Since CompTIA certifications are vendor-neutral by achieving any CompTIA certification you give yourself a broad array of skills to qualify you for a variety of IT positions.

 

Complete this collection of three courses to prep for the CompTIA A+ certification exam–a crucial step towards starting an IT career. Master subject matter in areas like networking, preventative maintenance, and more. By the time you’re done, you’ll be able to troubleshoot networking and security issues like a pro, dramatically boosting your career prospects and earning potential.

Included:

Course 1: CompTIA A+ 220-1001 & CompTIA A+ 220-1002

CompTIA A+ 220-1001:
• Learn IT fundamentals such as how to install & configure hardware like PCs and laptops
• Understand basic networking principles

CompTIA A+ 220-1002:
• Understand how to install & configure PC operating systems
• Set up common features for Android & iOS, such as network connectivity and email

Course 2: CompTIA N10-007: CompTIA Network+

• Earn technical competency in networking administration & support
• Learn about network topologies & media, IT protocols & standards, etc.
• Master security, safety & environmental issues, and other domains of IT knowledge

Course 3: CompTIA SY0-501 Security+

• Learn security concepts pertaining to communications, infrastructure, cryptography & more
• Earn a valuable, highly-regarded credential


CompTIA A+ 220-901

Module 1 Introduction To Personal Computers And IT Certification
„„
1.1 Personal Computer Concepts Part 1
1.2 Personal Computer Concepts Part 2
1.3 Becoming An IT Professional
1.4 Certification Basics
1.5 Review

Module 2 Internal Hardware Components
„„
2.1 Motherboards Part 1
2.2 Motherboards Part 2
2.3 BIOS Part 1
2.4 BIOS Part 2
2.5 BIOS Part 3
2.6 Power Supplies Part 1
2.7 Power Supplies Part 2
2.8 Central Processing Unit Part 1
2.9 Central Processing Unit Part 2
2.10 Central Processing Unit Part 3
2.11 Memory Part 1
2.12 Memory Part 2
2.13 Review

Module 3 Storage Fundamentals
„„
3.1 Storage Overview
3.2 Magnetic Drives
3.3 Solid State And Flash Drives
3.4 Optical Drives
3.5 RAID Technologies
3.6 Tape Drives
3.7 Installing Hard Drives
3.8 Review

Module 4 Expanding Hardware Capabilities
„„
4.1 Expansion Components Overeview Part 1
4.2 Expansion Components Overeview Part 2
4.3 Expansion Technologies Part 1
4.4 Expansion Technologies Part 2
4.5 Video Cards Part 1
4.6 Video Cards Part 2
4.7 Sound Cards
4.8 Networking Interface Cards
4.9 Alternative Expansion Devices
4.10 Review

Module 5 Working With Peripheral Devices
„„
5.1 Peripheral Devices Overview
5.2 Input Devices Part 1
5.3 Input Devices Part 2
5.4 Input Devices Part 3
5.5 Output Devices Video Monitors Part 1
5.6 Output Devices Video Monitors Part 2
5.7 Output Devices Video Monitors Part 3
5.8 Output Devices Printers And Scanners Part 1
5.9 Output Devices Printers And Scanners Part 2
5.10 Output Devices Printers And Scanners Part 3
5.11 Output Devices Printers And Scanners Part 4
5.12 Input And Output Devices
5.13 Review

Module 6 Mobiles Devices
„„
6.1 Mobile Devices Overview
6.2 Laptop Computer Components Part 1
6.3 Laptop Computer Components Part 2
6.4 Laptop Computer Expansion Capabilities
6.5 Replacing Portable Computer Components Part 1
6.6 Replacing Portable Computer Components Part 2
6.7 Additional Mobile Devices Part 1
6.8 Additional Mobile Devices Part 2
6.9 Mobile Device Ports And Connectors
6.10 Review

Module 7 Computer Networking
„
7.1 Networking Fundamentals Part 1
7.2 Networking Fundamentals Part 2
7.3 Network Devices Part 1
7.4 Network Devices Part 2
7.5 Cable And Connectors Part 1
7.6 Cable And Connectors Part 2
7.8 TCP/IP Fundamentals Part 1
7.9 TCP/IP Fundamentals Part 2
7.10 TCP/IP Fundamentals Part 3
7.11 TCP/IP Fundamentals Part 4
7.12 TCP/IP Fundamentals Part 5
7.13 Internet Connectivity
7.14 Wireless Networks Part 1
7.15 Wireless Networks Part 2

Module 8 Hardware And Network Troubleshooting
„„
Troubleshooting Models Part 1
Troubleshooting Models Part 2
Troubleshooting Physical Issues Part 1
Troubleshooting Physical Issues Part 2
Troubleshooting Physical Issues Part 3
Troubleshooting Networking Issues Part 1
Troubleshooting Networking Issues Part 2
Troubleshooting Mobile Devices
Troubleshooting Printers

CompTIA Network+ N10-007 Course Description

Prerequisites
Students taking this course should meet the following pre-requisites:
• CompTIA A+ certification or equivalent experience
• At least 1 year of experience supporting TCP/IP networks
Course Objectives
By the end of this course, you will:
• Describe basic networking concepts
• Describe network infrastructure and explain how to deploy common network components
• Describe network operations and explain how to support a production network
• Describe network security concepts and explain how to implement basic network security
• Describe network troubleshooting and explain how to use common tools to troubleshoot a network

Lab Setup
To enhance learning and reinforce concepts, students can participate in the activities as desired. To prepare your own lab environment, please see the lab setup manual CompTIA Network+ N10-007 Course Lab Setup Guide.
NOTE: Some activities in this course include demonstrations using real-world tools. It is NOT a requirement to purchase or use these tools for successful completion of this course. Students are not expected to demonstrate the use of any particular tool during the exam. You WILL, however, have to be able to explain the purpose of all of the tools, how they work in general, and when it is appropriate to choose one particular tool over another.

Module 1 – Networking Concepts
1.1 Basic Networking
You will explain basic networking.

Topics:
• Intro to networking
• Networking architectures
• Activity Basic Networking

1.2 OSI Model
You will explain devices, applications, protocols, and services at their appropriate OSI layers.
Topics:
• Layer 7 – Application
• Layer 6 – Presentation
• Layer 5 – Session
• Layer 4 – Transport
• Layer 3 – Network
• Layer 2 – Data Link
• Layer 1 – Physical
• Activity Exploring the OSI Model

1.3 Protocols and Ports
You will explain the purposes and uses of ports and protocols.
Topics:
• Protocols and ports overview
• Activity Examining Protocols and Ports
• Connection-oriented vs. connectionless
• Transmission Control Protocol (TCP)
• User Datagram Protocol (UDP)
• Activity Comparing TCP and UDP
• Internet Protocol (IP)
• Internet Control Messaging Protocol (ICMP)
• Internet Group Messaging Protocol (IGMP)
• Activity Examining the Lower Layer Protocols
• Layer 7 Remote Control Protocols
• Layer 7 File Transfer Protocols
• Layer 7 Messaging Protocols
• Activity Examining Messaging Protocols
• Layer 7 Web Traffic Protocols
• Layer 7 Streaming Media Protocols
• Layer 7 Infrastructure Management Protocols

1.4 Switching
You will explain the concepts and characteristics of switching.
Topics:
• Packet-switched vs. circuit-switched networks

• Properties of Network Traffic
• Contention Management
• Activity Creating Collision and Broadcast Domains
• Interface Properties and Segmentation
• Activity Creating a Basic Network Segment
• Switching part 2
• Activity Switching
• Switching Loop Management
• Activity Managing Switching Loops
• VLANs
• Activity Creating VLANs

1.5 Routing
You will explain the concepts and characteristics of routing.
Topics:
• ARP
• Activity Examining ARP
• IP Addressing Basics
• Activity Configuring IP
• Routers
• Activity Setting Up a Router
• Routing Basics
• Activity Adding Static Routes
• VLAN Routing
• Activity Routing Between VLANs
• NAT/PAT
• Activity Configuring NAT/PAT
• Routing Protocols
• Activity Configuring a Routing Protocol
• Firewalls
• Activity Configuring Firewalls

1.6 Advanced Switching and Routing Concepts
You will explain advanced switching and routing concepts.
Topics:
• IPv6 Concepts
• Activity Exploring IPv6
• Performance Concepts
• Distributed Switching
• Software-defined Networking

1.7 IP Addressing
You will, given a scenario, configure the appropriate IP addressing components.

Topics:
• Public vs. Private
• Loopback and Reserved
• Subnet Mask
• Default Gateway
• Virtual IP
• Subnetting
• Activity Learning to Subnet
• Address Assignments

1.8 Network Types and Topologies
You will compare and contrast the characteristics of network topologies, types and technologies.
Topics:
• Wired Topologies
• Wireless Topologies
• Network Types
• Technologies that Facilitate the Internet Of Things (IoT)
• (No activity for this chapter)

1.9 Wireless Technologies
You will, given a scenario, implement the appropriate wireless technologies and configurations.
Topics:
• Radio Basics
• 802.11 Standards
• Wi-Fi Frequencies
• Wi-Fi Antenna Concepts
• Bluetooth
• Cellular
• Site Surveys
• Activity Using an RF Spectrum Analyzer

1.10 Cloud Concepts
You will summarize cloud concepts and their purposes.
Topics:
• Types of Services
• Cloud Delivery Models
• Security Implications/Considerations
• Activity Exploring Cloud Services

1.11 Network Services
You will explain the functions of network services.
Topics:
• DNS Service
• Activity Setting up DNS
• DHCP Service
• Activity Setting Up DHCP
• NTP
• IPAM

Module 2 – Infrastructure

2.1 Cabling Solutions
You will, given a scenario, deploy the appropriate cabling solution.
Topics:
• Media Types
• Activity Testing a Fiber Optic Cable
• Plenum vs. PVC
• Connector Types
• Activity Crimping on an RJ-45 Connector
• Transceivers
• Termination Points
• Activity Terminating Cable to a 110 Block
• Copper Cable Standards
• Copper Termination Standards
• Activity Creating a Crossover Cable
• Ethernet Deployment Standards

2.2 Network Device Placement and Installation
You will, given a scenario, determine the appropriate placement of networking devices on a network and install/configure them.
Topics:
• Network Interface
• Repeater
• Hub
• Bridge
• Switch
• Router
• Modem
• Wireless Access Point
• Activity Setting up a WAP
• Firewall

• Media Converter
• Wireless Range Extender
• VoIP Endpoint

2.3 Advanced Network Devices
You will explain the purposes and use cases for advanced networking devices.
Topics:
• Multilayer Switch
• Wireless Controller
• Load Balancer
• IDS/IPS
• Proxy Server
• Activity Configuring Proxy Settings
• VPN Concentrator
• AAA/RADIUS Server
• UTM Appliance
• NGFW/Layer 7 Firewall
• VoIP PBX
• VoIP Gateway
• Content Filter

2.4 Virtualization and Network Storage Technologies
You will explain the purposes of virtualization and network storage technologies.
Topics:
• Virtual Networking Components
• Network Storage Types
• Connection Types
• Jumbo Frames
• (No activity for this chapter)

2.5 WAN Technologies
You will compare and contrast WAN technologies.
Topics:
• Service Types
• Transmission Mediums
• Characteristics of Service
• Activity Configuring WAN Links
• Termination

Module 3 – Network Operations
3.1 Documentation
You will, given a scenario, use appropriate documentation and diagrams to manage the network.
Topics:
• Diagram Symbols
• Standard Operating Procedures/Work Instructions
• Logical vs. Physical Diagrams
• Rack Diagrams
• Change Management Documentation
• Wiring and Port Locations
• IDF/MDF Documentation
• Labelling
• Network Configuration and Performance Baselines
• Inventory Management
• Activity Using Documentation

3.2 Business Continuity and Disaster Recovery
You will compare and contrast business continuity and disaster recovery concepts.
Topics:
• Availability Concepts
• Recovery
• Activity Backing Up Your Data
• MTTR
• MTBF
• SLA Requirements

3.3 Scanning, Monitoring, and Patching
You will explain common scanning, monitoring and patching processes and summarize their expected outputs.
Topics:
• Processes
• Event Management
• SNMP Monitors
• Metrics
• Activity Testing the Network

3.4 Remote Access Methods
You will, given a scenario, use remote access methods.
Topics:
• VPN
• RDP
• SSH
• VNC
• Telnet
• HTTPS/Management URL
• Remote File Access
• Out-of-Band Management
• Activity Making Remote Connections

3.5 Policies and Best Practices
You will identify policies and best practices.
Topics:
• Privileged User Agreement
• Password Policy
• On-boarding/Off-boarding Procedures
• Licensing Restrictions
• International Export Controls
• Data Loss Prevention
• Remote Access Policies
• Incident Response Policies
• BYOD
• AUP
• NDA
• System Life Cycle
• Safety Procedures And Policies
• Activity Creating Policies and Procedures

Module 4 – Network Security
4.1 Physical Security Devices
You will summarize the purposes of physical security devices.
Topics:
• Detection
• Prevention
• (No activity for this chapter)

4.2 Authentication and Access Control
You will explain authentication and access controls.
Topics:
• Authorization, Authentication, and Accounting
• Multifactor Authentication
• Access Control
• Activity Examining Access Control Mechanisms

4.3 Basic Wireless Network Security
You will, given a scenario, secure a basic wireless network.
Topics:
• WPA
• WPA2
• TKIP-RC4
• CCMP-AES
• Authentication and Authorization
• Geofencing
• Activity Demonstrating the Need for Wireless Security

4.4 Common Network Attacks
You will summarize common networking attacks.
Topics:
• DoS
• Social Engineering
• Insider Threat
• Logic Bomb
• Rogue Access Point
• Evil Twin
• War-driving
• Phishing
• Ransomware
• DNS Poisoning
• ARP Poisoning
• Spoofing
• Deauthentication
• Brute Force
• VLAN Hopping
• Man-in-the-Middle
• Exploits vs. Vulnerabilities
• Activity Conducting a Phishing Attack

4.5 Network Device Hardening
You will, given a scenario, implement network device hardening.
Topics:
• Changing Default Credentials
• Avoiding Common Passwords
• File Hashing
• Generating New Keys
• Activity Supporting Secure Authentication and Encryption
• Upgrading Firmware
• Patching and Updates
• Disabling Unnecessary Services
• Using Secure Protocols
• Disabling Unused Ports

4.6 Common Mitigation Techniques
You will explain common mitigation techniques and their purposes.
Topics:
• Signature Management
• Device Hardening
• Change Native VLAN
• Switchport Protection
• Network Segmentation
• Privileged User Account
• File Integrity Monitoring
• Role Separation
• Restricting Access Via ACLs
• Honeypot/Honeynet
• Penetration Testing
• Activity Implementing a Honeypot

Module 5 – Network Troubleshooting and Tools
5.1 Network Troubleshooting Methodology
You will explain the network troubleshooting methodology.
Topics:
• Identify the Problem
• Establish a Theory of Probable Cause
• Test the Theory to Determine the Cause
• Establish a Plan of Action to Resolve the Problem and Identify Potential Effects
• Implement the Solution or Escalate as Necessary

• Verify Full System Functionality and, if Applicable, Implement Preventive Measures
• Document Findings, Actions, and Outcomes
• (No activity for this chapter)

5.2 Using the Appropriate Tool
You will, given a scenario, use the appropriate tool.
Topics:
• Hardware Tools – Basic Hand Held
• Hardware Tools – Analyzers
• Activity Troubleshooting with Hardware Tools
• Software Tools – Testers and Analyzers
• Activity Troubleshooting with Software Tools
• Software Tools – Command Line
• Activity Using Command Line Tools

5.3 Troubleshoot Wired Connectivity and Performance
You will, given a scenario, troubleshoot common wired connectivity and performance issues.
Topics:
• Signal Issues:
• Attenuation
• Latency
• Jitter
• Crosstalk
• EMI
• Activity Troubleshooting Signal Problems
• Physical Issues:
• Open/short
• Incorrect pin-out
• Incorrect Cable Type
• Bad Port
• Damaged cable
• Bent pins
• Transceiver Issues:
• Transceiver mismatch
• TX/RX reverse
• Duplex/speed mismatch
• Activity Troubleshooting Transceiver Problems
• Traffic Flow Issues:
• Bottleneck
• VLAN mismatch
• Network connection LED status indicators

5.4 Troubleshoot Wireless Connectivity and Performance
You will, given a scenario, troubleshoot common wireless connectivity and performance issues.
Topics:
• Signal Loss:
• Attenuation
• Reflection
• Refraction
• Absorption
• Latency & Jitter
• Antenna Issues:
• Incorrect antenna type
• Incorrect antenna placement
• Incorrect WAP type
• WAP Issues:
• Interference
• Channel overlap
• Overcapacity
• Distance limitations
• Frequency mismatch
• Power levels
• Signal-to-noise ratio
• WAP Misconfiguration:
• Wrong SSID
• Wrong passphrase
• Security type mismatch
• Activity Troubleshooting WAP Issues

5.5 Troubleshoot Common Network Service Issues
You will, given a scenario, troubleshoot common network service issues.
Topics:
• Common Network Issues:
• Physical Connectivity
• Incorrect IP Address
• Incorrect Gateway
• Incorrect Netmask
• Names Not Resolving
• Untrusted SSL Certificate
• DHCP Issues:
• Duplicate IP Addresses
• Expired IP Address
• Rogue DHCP
• Exhausted DHCP Scope
• Firewall/ACL Issues:

• Blocked TCP/UDP Ports
• Incorrect Host-based Firewall Settings
• Incorrect ACL Settings
• Advanced Network Issues:
• DNS Server Issues
• Duplicate MAC Addresses
• Incorrect Time
• Unresponsive Service
• Hardware Failure
• Activity Case Study: Troubleshooting an Unusual
CompTIA A+ 220-901

Module 1 Introduction To Personal Computers And IT Certification
„„
1.1 Personal Computer Concepts Part 1
1.2 Personal Computer Concepts Part 2
1.3 Becoming An IT Professional
1.4 Certification Basics
1.5 Review

Module 2 Internal Hardware Components
„„
2.1 Motherboards Part 1
2.2 Motherboards Part 2
2.3 BIOS Part 1
2.4 BIOS Part 2
2.5 BIOS Part 3
2.6 Power Supplies Part 1
2.7 Power Supplies Part 2
2.8 Central Processing Unit Part 1
2.9 Central Processing Unit Part 2
2.10 Central Processing Unit Part 3
2.11 Memory Part 1
2.12 Memory Part 2
2.13 Review

Module 3 Storage Fundamentals
„„
3.1 Storage Overview
3.2 Magnetic Drives
3.3 Solid State And Flash Drives
3.4 Optical Drives
3.5 RAID Technologies
3.6 Tape Drives
3.7 Installing Hard Drives
3.8 Review

Module 4 Expanding Hardware Capabilities
„„
4.1 Expansion Components Overeview Part 1
4.2 Expansion Components Overeview Part 2
4.3 Expansion Technologies Part 1
4.4 Expansion Technologies Part 2
4.5 Video Cards Part 1
4.6 Video Cards Part 2
4.7 Sound Cards
4.8 Networking Interface Cards
4.9 Alternative Expansion Devices
4.10 Review

Module 5 Working With Peripheral Devices
„„
5.1 Peripheral Devices Overview
5.2 Input Devices Part 1
5.3 Input Devices Part 2
5.4 Input Devices Part 3
5.5 Output Devices Video Monitors Part 1
5.6 Output Devices Video Monitors Part 2
5.7 Output Devices Video Monitors Part 3
5.8 Output Devices Printers And Scanners Part 1
5.9 Output Devices Printers And Scanners Part 2
5.10 Output Devices Printers And Scanners Part 3
5.11 Output Devices Printers And Scanners Part 4
5.12 Input And Output Devices
5.13 Review

Module 6 Mobiles Devices
„„
6.1 Mobile Devices Overview
6.2 Laptop Computer Components Part 1
6.3 Laptop Computer Components Part 2
6.4 Laptop Computer Expansion Capabilities
6.5 Replacing Portable Computer Components Part 1
6.6 Replacing Portable Computer Components Part 2
6.7 Additional Mobile Devices Part 1
6.8 Additional Mobile Devices Part 2
6.9 Mobile Device Ports And Connectors
6.10 Review

Module 7 Computer Networking
„
7.1 Networking Fundamentals Part 1
7.2 Networking Fundamentals Part 2
7.3 Network Devices Part 1
7.4 Network Devices Part 2
7.5 Cable And Connectors Part 1
7.6 Cable And Connectors Part 2
7.8 TCP/IP Fundamentals Part 1
7.9 TCP/IP Fundamentals Part2
7.10 TCP/IP Fundamentals Part3
7.11 TCP/IP Fundamentals Part 4
7.12 TCP/IP Fundamentals Part 5
7.13 Internet Connectivity
7.14 Wireless Networks Part 1
7.15 Wireless Networks Part 2

Module 8 Hardware And Network Troubleshooting
„„
Troubleshooting Models Part 1
Troubleshooting Models Part 2
Troubleshooting Physical Issues Part 1
Troubleshooting Physical Issues Part 2
Troubleshooting Physical Issues Part 3
Troubleshooting Networking Issues Part 1
Troubleshooting Networking Issues Part 2
Troubleshooting Mobile Devices
Troubleshooting Printers

CompTIA A+ 220-902

Module 1: Introduction To Operating Systems

1.1 Introduction

1.2 Operating Systems Overview Part 1

1.3 Operating Systems Overview Part 2

1.4 Operating Systems Functions Part 1

1.5 Operating Systems Functions Part 2

1.6 Windows OS Versions Part 1

1.7 Windows OS Versions Part 2

1.8 Windows OS Versions Part 3

1.9 Basic Navigation And Management Part 1

1.10 Basic Navigation And Management Part 2

Module 2: Installing Windows Operating Systems

2.1 PreInstalling Task

2.2 Performing Clean Installs Part 1

2.3 Performing Clean Installs Part 2

2.4 Performing Upgrades

2.5 Migrating User Data

Module 3: Configuration And Management In Windows

3.1 Using Control Panel And PC Settings Part 1

3.2 Using Control Panel And PC Settings Part 2

3.3 Using Control Panel And PC Settings Part 3

3.4 Using Graphical Administrative Tools Part 1

3.5 Using Graphical Administrative Tools Part 2

3.6 Using Graphical Administrative Tools Part 3

3.7 Using Graphical Administrative Tools Part 4

3.8 Using Command Line Administrative Tools

3.9 Configuring Networking Part 1

3.10 Configuring Networking Part 2

3.11 Configuring Networking Part 3

3.12 Operating System Security Part 1

3.13 Operating System Security Part 2

3.14 Operating System Security Part 3

3.15 Windows Preventative Maintenance

Module 4: Utilizing Alternative Operating Systems

4.1 Mac And Linux Overview

4.2 OS Features And Tools

4.3 Best Practices Using Alternative Operating

Systems

4.4 Basic Command Line Administration In Linux

4.5 Network Operating Systems Part 1

4.6 Network Operating Systems Part 2

Module 5: Virtualization And Cloud Computing

5.1 Understanding Virtualization

5.2 Basic Cloud Concepts

Module 6: Managing Mobile Devices

6.1 Mobile Devices Overview

6.2 Mobile Operating Systems

6.3 Network Connectivity And Email

6.4 Mobile Device Synchronization

Module 7: Understanding System Security

7.1 Understanding Threats To Security Part 1

7.2 Understanding Threats To Security Part 2

7.3 Understanding Threats To Security Part 3

7.4 Understanding Common Prevention Methods Part 1

7.5 Understanding Common Prevention Methods Part 2

7.6 Understanding Common Prevention Methods Part 3

Module 8: Troubleshooting And Operational Procedures

8.1 Troubleshooting Theory

8.2 Communication And Professionalism Part 1

8.3 Communication And Professionalism Part 2

8.4 Operational And Safety Procedures

8.5 Security And Privacy Guidelines For Troubleshooting

8.6 Troubleshooting Operating Systems Part 1

8.7 Troubleshooting Operating Systems Part 2

8.8 Troubleshooting Mobile Devices Part 1

8.9 Troubleshooting Mobile Devices Part 2

8.10 Troubleshooting Common Security Issues Part 1

8.11 Troubleshooting Common Security Issues Part 2

8.12 Conclusion

CompTIA SY0-501: Security+

Module 1 – Threats, Attacks, and Vulnerabilities

1.1 Introduction
1.2 Types Of Malware – Part 1
1.3 Types Of Malware – Part 2
1.4 Types Of Attacks – Part 1
1.5 Types Of Attacks – Part 2
1.6 Types Of Attacks – Part 3
1.7 Types Of Attacks – Part 4
1.8 Types Of Attacks – Part 5
1.9 Threat Actors – Part 1
1.10 Threat Actors – Part 2
1.11 Penetration Testing And Vulnerability Scanning – Part 1
1.12 Penetration Testing And Vulnerability Scanning – Part 2
1.13 Impact Of Vulnerabilities – Part 1
1.14 Impact Of Vulnerabilities – Part 2

Module 2 – Technologies and Tools

2.1 Networking Hardware And Software – Part 1
2.2 Networking Hardware And Software – Part 2
2.3 Networking Hardware And Software – Part 3
2.4 Networking Hardware And Software – Part 4
2.5 Networking Hardware And Software – Part 5
2.6 Networking Hardware And Software – Part 6
2.7 Security Assessment – Part 1
2.8 Security Assessment – Part 2
2.9 Troubleshooting Issues – Part 1
2.10 Troubleshooting Issues – Part 2
2.11 Securing Mobile Devices – Part 1
2.12 Securing Mobile Devices – Part 2
2.13 Securing Mobile Devices – Part 3
2.14 Securing Mobile Devices – Part 4
2.15 Secure Protocols – Part 1
2.16 Secure Protocols – Part 2

Module 3 – Architecture and Design

3.1 Secure Network Architecture – Part 1
3.2 Secure Network Architecture – Part 2
3.3 Secure System Designs – Part 1
3.4 Secure System Designs – Part 2
3.5 Secure Staging Deployment Concepts
3.6 Embedded Systems – Part 1
3.7 Embedded Systems – Part 2
3.8 Application Development And Deployment – Part 1
3.9 Application Development And Deployment – Part 2
3.10 Application Development And Deployment – Part 3
3.11 Physical Security Controls – Part 1
3.12 Physical Security Controls – Part 2
3.13 Physical Security Controls – Part 3
3.14 Cloud Virtualization – Part 1
3.15 Cloud Virtualization – Part 2

Module 4 – Identity and Access Management

4.1 Identity And Access Management – Part 1
4.2 Identity And Access Management – Part 2
4.3 Identity And Access Services – Part 1
4.4 Identity And Access Services – Part 2
4.5 Management Controls – Part 1
4.6 Management Controls – Part 2
4.7 Account Management Practices – Part 1
4.8 Account Management Practices – Part 2
4.9 Account Management Practices – Part 3

Module 5 – Risk Management

5.1 Organizational Security – Part 1
5.2 Organizational Security – Part 2
5.3 Business Impact Analysis Concepts – Part 1
5.4 Business Impact Analysis Concepts – Part 2
5.5 Risk Management – Part 1
5.6 Risk Management – Part 2
5.7 Incident Response Procedures – Part 1
5.8 Incident Response Procedures – Part 2
5.9 Forensics – Part 1
5.10 Forensics – Part 2
5.11 Disaster Recovery – Part 1
5.12 Disaster Recovery – Part 2
5.13 Types Of Control – Part 1
5.14 Types Of Control – Part 2
5.15 Data Security And Privacy Practices – Part 1
5.16 Data Security And Privacy Practices – Part 2

Module 6 – Cryptography and PKI

6.1 Cryptographic Basics – Part 1
6.2 Cryptographic Basics – Part 2
6.3 Cryptographic Basics – Part 3
6.4 Cryptographic Algorithms – Part 1
6.5 Cryptographic Algorithms – Part 2
6.6 Wireless Security – Part 1
6.7 Wireless Security – Part 2
6.8 Implementing PKI – Part 1
6.9 Implementing PKI – Part 2
6.10 Implementing PKI – Part 3
6.11 Conclusion

A common concern with eLearning is that you will be unsupported as a learner.  With our courses this is not so.  Not only will you be able to see questions asked by previous learners through subject forums, but you will be able to directly message the trainer if you are stuck or don’t understand something.

Trainers will respond to your question(s) within 24 hours, but usually much quicker.

Furthermore, our courses use multi-media and have been carefully designed to cater for different learning styles, preferences and abilities:

  • Visual Learners – our courses are visually engaging, with many diagrams and images to illustrate and highlight key points
  • Auditory Learners – our courses contain clear audio, delivered by subject specialists rather than actors, which we find helps ensure that emphasis is placed on the most important aspects
  • Kinaesthetic Learners – our courses have many test questions and inter-active exercises embedded within them to aid those who learn best through practicing what they have learnt
  • Course Accessibility – if you have a hearing impairment, or need to turn the audio off, full transcripts are available within our courses

Some benefits of eLearning include:

  • Learning can occur at a time and place to suit you – around your work commitments and lifestyle
  • You can repeat the course units, exercises and tests as many times as you like, until you are confident
  • It is often cheaper than classroom courses, and there are no travel costs!
  • Associated exams can also be taken at home, on-line at a time to suit you using ProctorU service

This software has been made available over your network connection via your web browser. The design has been implemented in Adobe Flash and contains Adobe PDF files. Your system should have the following minimum specification:-

  • Windows7®, Vista® or XP®, MAC OSX or Linux Ubuntu
  • Broadband-grade connection (=>0.5MB/sec)
  • Web Browser IE7+, Firefox.

The system should include the latest updates & service packs. The software is best viewed at 1024 x 768 or higher resolution, a soundcard with speakers or headphones is also recommended.

TAKE THIS COURSE
  • £500.00 Excl VAT
  • Unlimited access anywhere, any time for 12 months
  • 90 hours of content
  • Fast effective training, written and designed by industry experts
  • Track your progress with our Learning Management System
  • Support available
  • Learn at your own pace and leisure
  • Easier to retain knowledge and revise topics than traditional methods

Currency Converter

Currency Conversions are estimates and should be used as a cost guide.

Reviews

Cart

Who’s Online

There are no users currently online

Who’s Online

There are no users currently online
top
Balance Global Facebook Balance Global Linkedin Balance Global Facebook

� BALANCE GLOBAL. ALL RIGHTS RESERVED. REGISTERED OFFICE: KINGSMEAD INTERNET INVESTMENTS LTD T/A BALANCE GLOBAL 16 GARSTON LANE, KENLEY, SURREY CR8 5BA REGISTERED IN ENGLAND. 6954654.THE COMPANY'S MAIN COUNTRY OF OPERATION IS THE UNITED KINGDOM. PRINCE2�/PRINCE2 Agile�/ITIL�/MSP� IS A REGISTERED TRADEMARK OF AXELOS LIMITED,USED UNDER PERMISSION OF AXELOS LIMITED. ALL RIGHTS RESERVED. THE SWIRL LOGO IS A TRADEMARK OF AXELOS LIMITED, USED UNDER PERMISSION OF AXELOS LIMITED. ALL RIGHTS RESERVED. AGILEPM� IS A REGISTERED TRADEMARK OF AGILE BUSINESS CONSORTIUM LIMITED. ALL RIGHTS RESERVED. APMG INTERNATIONAL CHANGE MANAGEMENT IS A TRADEMARK OF THE APM GROUP LIMITED. ALL RIGHTS RESERVED. THE APMG INTERNATIONAL AGILEPM AND SWIRL DEVICE lOGO, THE APMG INTERNATIONAL CHANGE MANAGEMENT AND SWIRL DEVICE LOGO ARE TRADEMARKS OF THE APM GROUP LIMITED, USED UNDER PERMISSION OF THE APM GROUP LIMITED. All RIGHTS RESERVED. THE APMG INTERNATIONAL PRAXIS FRAMEWORK AND SWIRL DEVICE LOGO IS A TRADEMARK OF THE APM GROUP LIMITED AND PRAXIS FRAMEWORK LTD, USED UNDER PERMISSION OF THE APM GROUP LIMITED. ALL RIGHTS RESERVED.Balance Global. All rights reserved.

X